Brother DCP-9010CN User Manual page 211

Hide thumbs Also See for DCP-9010CN:
Table of Contents

Advertisement

Network Scanning
Configuring the Scan to Network Default Settings
a
Choose Network in FTP/Network Scan Settings from FTP/Network Scan Settings tab. Press
Submit.
b
Choose the Profile you want to configure in FTP/Network Scan Profile.
c
Enter the name that you want to use for the Scan to Network profile. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
d
The Host Address is the domain name of the CIFS server. Enter the Host Address (for example
ftp.example.com) (up to 60 characters) or the IP address (for example 192.23.56.189).
e
Enter the destination folder where your document will be stored on the CIFS server (for example
/brother/abc/) (up to 60 characters).
f
Choose the file name you want to use for the scanned document. You can choose from seven preset
and two user defined File Names. The file name that will be used for your document will be the file name
you selected plus the last 6 digits of the flatbed/ADF scanner counter plus the file extension (For
example, Estimate098765.pdf). You can also manually enter a File Name up to 32 characters.
g
Choose the scan quality from the drop-down list. You can choose Color 100, Color 200, Color 300,
Color 600, B&W 200, B&W 200x100, Gray 100, Gray 200 or Gray 300.
h
Choose the file type for the document from the drop-down list. You can choose PDF, Secure PDF, XPS
or JPEG for colour or grey scale documents and PDF, Secure PDF or TIFF for B/W document.
i
If you want to protect the profile, check Use PIN for authentication and enter a 4-digit PIN number in
PIN Code.
j
Choose the authentication method. You can choose Auto, Kerberos or NTLMv2.
If you choose Auto the authentication method will be detected automatically.
k
Enter the Username that has been registered with the CIFS server for the machine (up to 32 characters).
l
Enter the Password for access to the CIFS server (up to 32 characters).
m
If you want to set Kerberos Server Address manually, enter the Kerberos Server Address (for example
/brother/abc/) (up to 60 characters).
12
12
203

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-9120cnMfc-9320cw

Table of Contents