Brother DCP-9010CN User Manual page 212

Network Scanning
Scan to Network using Scan to Network Profiles
a
Load your document.
b
Press (Scan).
c
Press a or b to choose Scan to Network. Press OK.
d
Press a or b to choose one of the profiles listed. Press OK.
e
If you check Use PIN for authentication in FTP/Network Scan Profile of Web Based Management,
the LCD will prompts you to enter a PIN number. Enter the 4-digit PIN number and then press OK.
 If the profile is complete, you will automatically go to step i.
 If the profile is not complete, for instance, the quality or file type are not chosen, you will be prompted
to enter any missing information in the following steps.
f
Choose one of the options below:
Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,

Gray 100 dpi, Gray 200 dpi or Gray 300 dpi. Press OK and go to step g.
 Press a or b to choose B&W 200 dpi or B&W 200x100 dpi. Press OK and go to step h.
g
Press a or b to choose PDF, Secure PDF, JPEG or XPS.
Press OK, and go to step i.
h
Press a or b to choose PDF, Secure PDF or TIFF. Press OK.
Note
If you choose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 1-9 before
it starts scanning.
i
Do one of the following:
If you want to start scanning, press Mono Start or Colour Start.

If you want to change the file name, go to step j.

j
Press a or b to choose a file name you want to use and press OK. Press Mono Start or Colour Start.
Note
If you want to change the file name manually, go to step k.
k
Press a or b to choose <Manual>. Press OK.
Enter the file name you want to use (up to 32 characters) and press OK.
Press Mono Start or Colour Start.
Note
Scan Type depends on the settings of the DeviceButton tab, Mono Start or Colour Start do not change
the settings.
12
12
204