DEVIreg™ 610
Dimensions
Weight
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
▪ EN/IEC 60730-1 (general)
▪ EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
Please also note the following:
▪ The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
▪ The thermostat must be connected to a power supply
via an all-pole disconnection switch.
▪ The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
▪ Always connect the thermostat to continuous power
supply.
▪ Do not expose the thermostat to moisture, water, dust,
and excessive heat.
Installation Guide
100 x 69.5 x 45mm
165g
5