Application: devireg 610 is an electronic thermostat designed for regulating heating and cooling, from -10 C to +50 devireg 610 is moisture proof (IP44). devireg 610 has a built-in 2-pole switch, so an external switch is not necessary. devireg 610 is supplied with a NTC sensor of 2.5m cable.
Technical Data Temperature Range: -10°C to +50°C Operating Temp. -30°C to +50°C Voltage: 220 to 240V ~ 50Hz Load: 10 (3) A Hysteresis: 0.4°C Moisture Proof: IP 44 Sensing Unit: -10°C 100kOhm Sensing Values: 0°C 50kOhm +25°C 15kOhm +50°C 5kOhm...
Page 6
The following Warranty is provided by DEVI Heating Systems ABN 39 898 434 262, hereinafter referred to as DEVI. It is offered in addition to any relevant statutory Federal or State Warranty. DEVI is a partner of the DEVI Group of Companies, who are a Danish based specialist heating product manufacturer.
Page 7
Rectification work, performed as a consequence of matters not covered by the Warranty, will be at the expense of the customer. DEVI will respond honestly, efficiently and promptly to all queries and reasonable requests from our customers. DEVI...
Page 8
The obligation of DEVI will be to repair or supply a new unit, free of charge to the customer, without secondary charges linked to repairing the unit. In case of defective...
Page 9
If DEVI is required to inspect or repair any defects caused by any of the above, then all work will be fully chargeable. The DEVI warranty is void, if payment of the equipment is in default. At all times, we at DEVI will respond honestly, efficiently and promptly to all queries and reasonable requests from our customers.
The DEVI™ Warranty is granted to: Name: Address: Phone: Postal Code: Please Observe! In order to obtain the DEVI™ Warranty, the following must be carefully filled in. See other conditions on the overleaf. Electrical Installation By: Installation Date: Type of Thermostat: Production Code:...