Safety Instructions - DEVI DEVIreg Touch Installation Manual

DEVIreg™ Touch
1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off
before installation.
IMPORTANT: When the thermostat is used to control a
floor heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
The thermostat must be connected to a power supply
via an all-pole disconnection switch.
Always connect the thermostat to continuous power
supply.
Do not expose the thermostat to moisture, water, dust,
and excessive heat.
Installation Guide 7