Safety Instructions - DEVI DEVIreg 330 Installation Manual

DEVIreg™ 330 (+60 to +160°C)
IP class
Protection class
Dimensions
Weight
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
▪ EN/IEC 60730-1 (general)
▪ EN/IEC 60730-2-9 (thermostat)
1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off
before installation.
Please also note the following:
▪ The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
▪ The thermostat must be connected to a power supply
via an all-pole disconnection switch.
▪ The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
▪ Always connect the thermostat to continuous power
supply.
▪ Do not expose the thermostat to moisture, water, dust,
and excessive heat.
Installation Guide
20
Class II -
86 x 36 x 58mm
83g
5