Table of Contents
Advertisement
2.
Carefully remove the side key button cable from the adhesive that secures it to the display panel
assembly, and then lift the cable (2) up to remove the cable from the tablet.
Reverse this procedure to install the side key button cable.
NOTE:
Replacement insulation, conductive tape, and shielding is provided in the Tapes and Shields Kit, part
number 843121-001.
Front-facing camera
Description
Front-facing camera (includes cable)
Before removing the front-facing camera, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the following components:
a.
Micro SIM/microSD card tray (see
b.
White back cover (see
Micro SIM/microSD card tray on page
White back cover on page
14).
15).
Spare part number
834324-001
Front-facing camera
25
Advertisement
Table of Contents
