Table of Contents
Advertisement
5
Removal and replacement procedures
Tablet component replacement procedures
CAUTION:
provider. Accessing these parts can damage the tablet and void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your tablet, go to http://partsurfer.hp.com, select your country or region, and then follow
the on-screen instructions.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 23 screws that must be removed, replaced, and/or loosened when servicing the tablet.
Make special note of each screw size and location during removal and replacement.
Micro SIM/microSD card tray
CAUTION:
safely remove the micro SIM/microSD card.
NOTE:
The card tray is spared as part of the Plastics Kit, spare part number 834320-001.
Remove the microSD card tray:
1.
Save your information and close all programs associated with the microSD card.
2.
Click the remove hardware icon on the Windows desktop in the notification area, at the far right of the
taskbar. Then follow the on-screen instructions.
3.
Insert the card removal tool (1) into the card tray access hole.
4.
Press in gently only until the card tray is ejected.
5.
Remove the tray (2) from the tablet.
Reverse the steps to replace the tray.
14
Chapter 5 Removal and replacement procedures
Tablet components described in this chapter should only be accessed by an authorized service
To reduce the risk of loss of data or an unresponsive system, use the following procedure to
Advertisement
Table of Contents
