Table of Contents
Advertisement
WWAN module
Description
Huawei ME936 LT4110 LTE/HSPA+ M.2
Huawei ME206 LT4114 LTE M.2
Before removing the WWAN module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the following components:
a.
Micro SIM/microSD card tray (see
b.
White back cover (see
c.
Black back cover (see
d.
Middle frame (see
5.
Disconnect the battery (see
6.
Remove the LCM display cable (see
Remove the WWAN module:
NOTE:
Note which WWAN antenna cable is connected to the WWAN module "Main" terminal and which
antenna cable is connected to the WWAN module "Aux" terminal.
1.
Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
2.
Remove the 2 mm P1 Phillips screw (2) that secures the WWAN module to the system board.
32
Chapter 5 Removal and replacement procedures
Micro SIM/microSD card tray on page
White back cover on page
Black back cover on page
Middle frame on page
19).
Battery on page
22).
LCM display cable on page
14).
15).
16).
30).
Spare part number
756993-005
761233-005
Advertisement
Table of Contents
