Micro Usb Board Cable - HP ENVY 8 Note 5000 Maintenance And Service Manual

Micro USB board cable

Description
Micro USB board cable
Before removing the micro USB board cable, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the following components:
a. Micro SIM/microSD card tray (see
b. White back cover (see
c. Black back cover (see
d. Middle frame (see
5. Disconnect the battery (see
6. Remove the LCM display cable (see
7. Remove the WWAN module (see
Remove the micro USB board cable:
CAUTION:
1. Disconnect the top edge of the cable (1).
38 Chapter 5 Removal and replacement procedures
White back cover on page
Black back cover on page
Middle frame on page
Battery on page
Use care to prevent damaging the ZIF connectors and ribbon cables.
Micro SIM/microSD card tray on page
15).
16).
19).
22).
LCM display cable on page
WWAN module on page 32).
Spare part number
834309-001
14).
30).