Table of Contents
Advertisement
3.
Remove the 7 Phillips M00x5 screws (2) that secure the system board to the display panel assembly,
and then remove the system board (3).
Reverse this procedure to install the system board.
Front-facing webcam
Description
Front-facing webcam (includes cable)
Before removing the front-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, shut it down through the operating
system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the card tray (see
5.
Remove the back cover (see
6.
Remove the battery (see
7.
Remove the middle frame cover (see
8.
Remove the system board (see
Remove the front-facing webcam:
1.
Place the system board face down, and then release the zero-insertion force (ZIF) connector (1) to which
the front-facing webcam cable is attached on the rear of the system board.
26
Chapter 5 Removal and replacement procedures
Card tray on page
14).
Back cover on page
15).
Battery on page
16).
Middle frame cover on page
System board on page
17).
24).
Spare part number
926165-001
Advertisement
Table of Contents
