Front-Facing Webcam - HP Slate 10 Plus Maintenance And Service Manual

Table of Contents

Advertisement

2.
Remove the system board (2).
Reverse this procedure to install the system board.

Front-facing webcam

Description
0.3-MP front-facing webcam (includes cable)
Before removing the front-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display panel assembly (see
5.
Remove the connector board (see
6.
Disconnect the battery cable from the system board (see
7.
Remove the left and right speaker connector boards (see
8.
Remove the system board (see
Remove the front-facing webcam:
1.
Turn the system board upside down, with the front-facing webcam toward you.
2.
Disconnect the front-facing webcam cable (1) from the system board.
26
Chapter 5 Removal and replacement procedures
Display panel assembly on page
Connector board on page
System board on page
Spare part number
776023-001
15).
19).
Battery on page
20).
Speaker connector boards on page
25).
21).

Advertisement

Table of Contents
loading

Table of Contents