Table of Contents
Advertisement
6.
Detach the delivery antenna board (3) from the back cover. (The delivery antenna board is
attached to the back cover with double-sided adhesive.)
7.
Remove the delivery antenna board and RF cable.
NOTE:
775642-001.
Reverse this procedure to install the delivery antenna board.
Front-facing webcam
Description
1.0-MP, fixed-focus front-facing webcam (includes cable and double-sided adhesive)
Before removing the front-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the top and bottom covers (see
5.
Remove the display panel assembly (see
Remove the front-facing webcam:
1.
Remove the Phillips PM1.4×2.5 screw (1) that secures the battery cable bracket to
the system board.
2.
Remove the battery cable bracket (2).
22
Chapter 5 Removal and replacement procedures
The RF cable is included in the back cover spare part kit, spare part number
Top and bottom covers on page
Display panel assembly on page
Spare part number
775655-001
15).
16).
Advertisement
Table of Contents
