Table of Contents
Advertisement
Remove the microphones:
CAUTION:
Use care to prevent damaging the ZIF connectors and ribbon cables.
1.
Release the ZIF connector (1) connecting the left microphone ribbon cable to the system board.
2.
Remove the microphone ribbon cable from the adhesive that secures to the display panel, lift the
microphone and cable (2) to remove it from the tablet.
3.
Disconnect the right microphone (3) from the system board, remove the microphone from the adhesive,
and then lift the microphone (4) up and out of the tablet.
Reverse this procedure to install the microphones.
Microphones
29
Advertisement
Table of Contents
