Mitel 6867 SIP User Manual page 58

Phoning
Function
Announcement to user
Announcement to group
Remote maintenance
on/off
Remote maintenance
onetime on/off
Free seating: Log in/out
Free configurable
Start/stop call recording
Call transfer
Home Alone on/off
Set up conference
Empty
Personal call routing
menu
Personal call routing
on/off
58
Description
Speak directly to an internal user via the loudspeaker
- where available - without them having to first pick up
the call. An announcement is a one-sided connection
and is indicated by two short signal tones on the
recipient phone.
Speak directly to a group of internal users via the
loudspeaker - where available - without them having
to first pick up the call. An announcement is a one-
sided connection and is indicated by two short signal
tones on the recipient phone. Announcement groups
will be defined by your system administrator. The
group number must be entered as two digits.
Allow permanent remote management access on
your phone.
Allow one-time remote management access on your
phone.
Log in/out on a free seating phone (see "Free seat-
ing", page 54).
You can use function commands to define a function
to suit your personal requirements. A function can
consist of one or more function commands, function
codes, and the phone number. You can either carry
out a function directly or store it under a key.
Record a call. The recordings are stored in your indi-
vidual e-mailbox only (see "Recording a call",
page 47).
Transfer a call to another user with or without prior notice.
If calls to a user group can only be answered by one
user, the user in question can activate Home Alone
on the user group. Then if the user is already in a call,
all subsequent internal or external calls to the user
group obtain a busy tone.
Set up a conference with two call parties.
The key assignment is configured with an empty
function. The key is not overwritten by the following
key assignments.
Direct access to the
personal call routing", page 51).
Activate/deactivate call routing profile (under the one
number user concept).
(see chapter "Activating
Routing
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.1 – R4.0 – 07.2015