To Answer The Callback Request - Mitel 6867 SIP User Manual

This function must be saved to a configurable function key with Self Ser-
vice Portal (see chapter "Configuring or deleting a key assignment",
page 88).
• You can activate only one callback at a time.
Notes:
• An unanswered callback request will automatically be cancelled by the
system after about 30 minutes.
Activating callback:
You called someone and hear the busy tone or the ring-back tone. Press the
function key for Callback.
➔
Depending on the communication system you hear the acknowledgement
tone.
Put the handset on-hook.
➔
The display shows
Clear callback:
Press the function key for Callback.
➔
Callback request is deleted.

To answer the callback request

Someone has asked you to call back. The display shows Callback.
You cannot automatically answer a callback request on your phone. You
can either enter the call number manually or use a CTI client, for example
the Mitel OfficeSuite.
Answering the callback request:
Enter a phone number in call preparation.
Pick up the handset or press the
You cannot delete a callback request.
Note:
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.1 – R4.0 – 07.2015
expected, LED of the function key is switched on.
Call
softkey.
Dial
Phoning
39