Table of Contents
Advertisement
Phoning
Hide number
You do not want your call number to appear on the terminal display of a
called party in the public network. The following options are available here:
Menu
Permanent
Per call
This function must be saved to a configurable function key with Self Service
Portal (see chapter "Configuring or deleting a key assignment", page 88).
• Your call number can only be hidden if you select an external call number.
Notes:
• This feature depends on the range of services offered by your provider.
Activating/deactivating calling line identification restriction permanently:
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.
Activating CLIR per call:
1. Press the function key for
2. Enter the call number and press the
➔
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the
same phone.
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold,
flashes.
Take back the call party on hold:
Press the Hold key, the flashing line key or the
➔
The call is active again.
40
Description
The call number is never displayed.
Call number should only be restricted for certain calls.
This function must be activated before dialling the call
number.
Call number is dialled and your own number is not displayed to the called
party.
Hide
number.
Hide
number.
Select
is displayed and the LED on the line key
softkey.
Pick
up.
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.1 – R4.0 – 07.2015
Advertisement
Table of Contents
