Table of Contents
Advertisement
This function must be saved to a function key over the Self Service Portal
(see "Configuring or deleting a key assignment", page 88).
Menu
Do not disturb (busy)
on/off
Do not disturb (for-
warding) on/off
Activating/deactivating do not disturb:
Press the function key for
ing)
➔
The function is activated/deactivated,
function key lights up/does not light up. Your callers hear the busy tone.
Activating intrusion/answering
You want to implement intrusion in a current call.
Intrusion allows you to access a current call between two call parties and
listen to their conversation. The call party to which you have initiated intru-
sion is notified (display and sound signals). Your call party can then
respond () to intrusion or reject it.
You can block intrusion; see "Protecting yourself against calls", page 81.
This function must be saved to a configurable function key with Self Ser-
vice Portal (see chapter "Configuring or deleting a key assignment",
page 88).
• Your system administrator must grant you intrusion rights.
Notes:
• Intrusion may infringe on your national data protection provisions or be
permitted only under certain circumstances. If you intend to use this
function, you should therefore notify your call party in advance.
Activating intrusion (the users are talking):
1. Press the function key for Intrusion.
2. Enter the call number of the user you want as per the key configuration.
➔
The intrusion tone indicates that the function has been activated.
➔
If the user has blocked intrusion, connection set up will be cancelled.
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.1 – R4.0 – 07.2015
Description
Your phone does not ring and is set to busy for incoming
calls.
Your phone does not ring and is set to busy for incoming
calls. Incoming calls are automatically forwarded to a
destination that has been configured by your system
administrator.
on/off.
Do not disturb (busy) on/off
is displayed and the LED on the
Phoning
or
Do not disturb (forward-
49
Advertisement
Table of Contents
