Table of Contents
Advertisement
Phoning
Renaming personal call routing:
Press the function key for
Scroll to
➔
A list of your routings is displayed.
1. Select the call routing you want and confirm with the
2. Enter the name and confirm with the
You can also store your individual call routing profiles over the Self Service
Portal on a function key and quickly activate or deactivate your desired call
routing profile by simply pressing that key.
Press the function key for the desired call routing profile.
➔
Call routing is activated/deactivated, LED of the function key is switched
on/off.
Activating ring alone
You want to specify the phone on which an incoming call is signalled
acoustically.
If your system administrator has set up one phone number with several
phones (see "One number user concept", page 7),you can use Ring Alone
to define on which phone a call is to be signalled acoustically. As soon as
you activate Ring Alone on one phone, the ring tone is deactivated for all
other phones. An incoming call is signalled in the display of all phones.
You can answer the call on each of your phones.
This function must be saved to a configurable function key with Self Ser-
vice Portal (see chapter "Configuring or deleting a key assignment",
page 88).
When you have activated ring alone but deactivated the personal call rout-
Note:
ing for a phone in parallel, an incoming call is not acoustically but only vis-
ually signalled.
Activating/deactivating ring alone
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.
52
Menu
and press the right navigation key to the right.
Pers. call routing
Ring Alone
softkey.
softkey.
Select
on/off.
softkey.
Modify
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.1 – R4.0 – 07.2015
Advertisement
Table of Contents
