Table of Contents
Advertisement
Note that secondary air tubes can be replaced without removing the baffle board.
Important Notes:
The air tubes are identified for placement as follows:
Stratford CF fireplace
OPERATING & INSTALLATION INSTRUCTIONS FOR STRATFORD CF ZERO CLEARANCE WOOD HEATER
Model
6. Insert a cotter pin in the last
hole on the right side of the
tube. Then bend the tabs on
the pin to keep in place.
7. Repeat steps 4, 5 and 6 for the
two tubes in the back then
install the baffle. Then, install
the two front tubes.
8. To remove the tubes use the
above steps in reverse order.
Type of tube
Front ►95 holes of 3.581 mm
Middle front ►67 holes of 3.175 mm
Middle rear ►67 holes of 2.768 mm
Rear ►67 holes of 2.565 mm
57
Advertisement
Table of Contents
