Table of Contents
Advertisement
5.2.5 Flue system Fire
Regular flue system maintenance and inspection can prevent flue system fires. If you have a flue system
fire, follow these steps:
1. Close the zero clearance wood inbuilt door and the air intake controls;
2. Alert your family of the possible danger;
3. If you require assistance, alert your fire department;
4. If possible, use a dry chemical fire extinguisher, baking soda or sand to control the fire. Do not use water
as it may cause a dangerous steam explosion;
5. Check outside to ensure that sparks and hot embers coming out of the flue are not igniting the roof;
6. Do not use the zero clearance wood inbuilt again until your flue system and zero clearance wood inbuilt
have been inspected by a qualified flue system sweep or a Fire Department Inspector.
PART B – INSTALLATION
Install the zero clearance wood inbuilt only as described in these instructions.
Parts Required
• Stratford CF
-
Flue lengths
-
Elbows (where necessary)
-
Hot air gravity distribution kit
-
Fresh air
-
Associated components as per these installation instructions.
6 SAFETY INFORMATION
6.1 Summary of Installation Cautions and Warnings
•
THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE APPLIANCE ALWAYS
OVERRIDES THE INFORMATION PUBLISHED, IN ANY OTHER MEDIA (OWNER'S MANUAL,
CATALOGUES, FLYERS, MAGAZINES AND/OR WEB SITES).
•
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING COMPONENTS
MAY RESULT IN HAZARDOUS CONDTIONS. WHERE ANY SUCH CHANGES ARE PLANNED, STOVE
BUILDER INTERNATIONAL INC. SHOULD BE CONTACTED IN ADVANCE.
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING BY THE TESTING
•
AUTHORITY IS CONSIDERED AS BREACHING AS/NZS 4013.
OPERATING & INSTALLATION INSTRUCTIONS FOR STRATFORD CF ZERO CLEARANCE WOOD HEATER
27
Advertisement
Table of Contents
