APPENDIX 2: OPTIONAL 240V FAN FOR HOT AIR GRAVITY DISTRIBUTION KIT -
MODERN STYLE (AC01387)
It is possible to connect a gravity kit fan (AC01387)* on the Hot Air Gravity Distribution Kit - Modern Style.
This fan will help extract warm air out of the gravity kit lover and push it into the room where the zero
clearance wood inbuilt is located.
* The Fan for Hot Air Gravity Distribution Kit - Modern Style (AC01387) with heat activated system, sold
separately, can be installed only with the Hot air gravity distribution kit - Modern style (AC01389).
For the complete Fan for Hot Air Gravity Distribution Kit - Modern Style (AC01387) installation procedure,
see the installation manual provided with the kit. You can also download this manual at osburn-
australia.com.
51
OPERATING & INSTALLATION INSTRUCTIONS FOR STRATFORD CF ZERO CLEARANCE WOOD HEATER