User Defined Size - Oki LP-2050-MF User Manual

System Menu
T
Chapter
1
‹ User Defined Size
Chapter
2
n
n
n
n
Chapter
3
Chapter
4
Chapter
5
100
LP-2050/LP-2050-MF User's Manual for Basic Printer Operation
Sets the roll sizes for the paper series used in the Printer.
User Defined 1
User Defined 2
User Defined 3
User Defined 4
<Parameter by selecting numbers>
279.4 mm (11 inches) to
914.4 mm (36 inches)
Note
The input range includes the following restrictions.
‹
(Input value of the upper size -50 mm (-1.97 inches)) to (Input value of the lower
size +50 mm (+1.97 inches))
The upper size refers to the size above the desired user defined size, and
the lower size refers to the size below. For example, with user defined 2, the
upper size is user defined 1, and the lower size is user defined 3.
Setting example:
With all user defined as their default values, the input range is as follows
when changing the size of defined user 2 from 620 mm (24.41 inches) to
another value.
864 mm (34.02 inches) to 500 mm (15.69 inches)
If the values are set outside the input range mentioned above, the setting
‹
values of all the user defined sizes are initialized to their default value when
the Printer restarts.
This setting is available when User Defined series is set to ON in Available
‹
Size Standards.
Default value:
User Defined 1 = 914 mm (35.98 inches)
User Defined 2 = 620 mm (24.41 inches)
User Defined 3 = 450 mm (17.72 inches)
User Defined 4 = 310 mm (12.20 inches)