Oki LP-2050-MF User Manual page 204

Error Log Reference
T
Chapter
1
(1) (2) (3)
W OM 4750
W OM 4800
W OP EF00
Chapter
2
W PD A300
W PD A401
W PD A402
Chapter
3
W PD A403
W PD A405
W PD A407
Chapter
4
W PD A408
W PD A500
W PD A501
W PD A502
Chapter
5
W PD A503
W PD A504
W PD A505
W PD A506
W PD A507
W PD A508
W PD A509
W PD A50A PDL ERR 50A
W PD A50B
W PD A50C PDL ERR 50C
W PD A50D PDL ERR 50D
W PD A50E
W PD A50F
W PD A510
W PD A511
W PD A512
W PD A513
W PD A514
(1) Type (2) Character string (3) Error number
204
LP-2050/LP-2050-MF User's Manual for Basic Printer Operation
Message
Receive message error from
MYKrcvInterface returned an error when
receiving a message from a TWAIN task
TWAIN
Send message error MYKsndInterface returned an error when
sending a message
Job ID mismatch
Occurs when the job status changes while the
job operation screen is displayed, and the correct
job control cannot be executed.
FORMATERROR An error exists in the D-SCAN format.
COMMAND ERROR Received an unsupported HP-GL or HP-GL/2
command.
# OF PARAM. ERROR The number of parameters for a HP-GL or HP-
GL/2 command is incorrect.
PARAM._RANGE_ERR Received a drawing command outside the
supported range of HP-GL or HP-GL/2 command
parameters, or a drawing command using
unusable parameter characters.
UNDEFINED COMMAND Received an unsupported HP-GL or HP-GL/2
command character set command.
POLYGON_BFFR_ERR
An overflow error for the polygon buffer size
occurred.
DATA IGNORED Data was disregarded because there was no
valid print data in the HP-GL command.
PATTERN OVERFLOW Pattern memory overflowed because there were
too many pattern registrations on one page.
HATCH OVERFLOW
Pattern memory overflowed because there were
too many hatch registrations on one page.
KANJI OVERFLOW External character memory overflowed because
there were too many external character
registrations for the D-SCAN format.
CHAR._OVERFLOW
No free memory area for the HP-GL user
registration characters.
VMS OVERFLOW VMS memory overflowed because the data
volume on one page was too large.
SPOOL OVERFLOW Spool memory overflowed.
POLYGON OVERFLOW An overflow error for the polygon buffer size
occurred.
PDL ERR 507 Program warning
PDL ERR 508
PDL ERR 509
PDL ERR 50B
PDL ERR 50E
PDL ERR 50F
PDL ERR 510
PDL ERR 511
PDL ERR 512
PDL ERR 513
DATA IGNORED Data was disregarded because there was no
valid print data on the paper.
Meaning
Restart the Printer.
0
Analyze the data dumped together
with the error message, and correct
the error on the computer side.
Correct the error on the computer
side.
Check on the computer side whether
valid print data is being transmitted.
Reduce the pattern registration data
on one page.
Reduce the hatch registration data
on one page.
Reduce the external character
registration data on one page.
Correct so that the number of
registrations or the data per
character is reduced.
Reduce the data volume on one
page.
When operating with Centering =
On, set to Centering = Off.
Correct the error on the computer
side. (Polygon buffer upper limit:
106600 points.)
When the error persists and there is
a problem in the printout, upgrade
the system.
Check on the computer side whether
valid print data is being transmitted.
Action