Oki LP-2050-MF User Manual page 50

Replacing the Roll Paper
T
Chapter
1
7
Chapter
2
Chapter
3
8
Chapter
4
Chapter
5
50
LP-2050/LP-2050-MF User's Manual for Basic Printer Operation
Approximately 90° Approximately 90°
Note
After closing a roll paper drawer, do not open it again until the Warming
‹
up... (Warming-up counter) message disappears.
Paper detection is performed immediately after closing the roll paper
‹
drawer. As such, opening a roll paper drawer at this time may cause a paper
jam.
‘ When you set a roll paper of a different type or series, press Paper on
TIP
the supply paper error screen. Set the type and the series of the new
paper roll on the paper setting popup screen which appears.
Slightly rewind the roll paper.
Slightly rewind the roll paper by turning the
paper feed knob by approximately 90°.
Close the roll paper drawer.
Slowly push in the drawer for rolls 1 and 2, or the
drawer for rolls 3 and 4. (It takes about 30 seconds
for the paper feeding to get ready.)
When the Printer contains the jobs to be
completed, the printing is started.