Control Panel - Pitney Bowes DM220i Operator's Manual

1. Control Panel—allows you to enter and setup information on
your machine.
2. Top Cover—opens up to allow replacement of the ink cartridge.
See Chapter 7, Maintenance for instructions.
3. Weighing Platform—allows you to weigh and calculate postage
of a mail piece based on the service selected.
4. Stacker Tray—allows the neat stacking of finished mail pieces.
5. Operator Guide Slot —allows you store the Operator Guide for
easy access.
6. LED—lights green when your system is on; lights orange when
your system is in "sleep" mode.
7. Transport Release Lever (two position)
Home - transport rollers engaged for processing mail (normal)
Released - transport rollers disengaged so you can clear a stalled
mail piece.
NOTE: The machine will not process mail when this lever is left in
the released position.
8. Feed Deck—supports your envelope, post card or tape sheet as
it passes under the printer mechanism.
9. Moistener (certain models only)—applies sealing fluid to the
envelope flap. You can seal envelopes or leave them unsealed,
depending on how you feed them.
10. Ink Waste Tray—collects ink waste.
SDC974B
2 • Getting to Know Your System
2-3