Mitel MiVoice 5361 User Manual page 62

Hide thumbs Also See for MiVoice 5361:
Table of Contents

Advertisement

Supplementary features
Activating ring alone
You wan to specify which of your phone shall ring when you receive a call.
When your system administrator has set up a phone number with several phones (One-
number user concept, see chapter "Purpose and function", page 7), you can define on
which phones a call shall acoustically be signalled using ring alone.
When you have activated ring alone on a phone, the acoustic ringing tone is deactivated
for all other phones (). An incoming call is signalled in the display of all phones. You can
answer the call on each of your phones.
Note:
When you have activated ring alone but deactivated the personal call routing for a phone in
parallel, an incoming call is not acoustically but only visually signalled.
This function must be stored under a function key (see chapter "Configuring keys",
page 83).
Ring alone
Silent intrusion
is a variant of the
Silent intrusion
Another user can intrude on your active call and listen in to your conversation without you
and your call party noticing. Unlike Intrusion you will receive neither a visual nor an acous-
tic signal.
This means you cannot reject Silent intrusion. The third user's microphone remains
switched off. He can however intrude on the call at any time by enabling his microphone
or pressing the
Intrusion
Your system administrator can allocate this function to a configurable key.
Notes:
• Silent intrusion has to be enabled. Contact your system administrator for more infor-
mation.
• Silent intrusion may infringe on your national data protection provisions or be permitted
only under certain circumstances.
• If you intend to use this function notify your call party in advance.
<Phone number>
62
In the idle state:
Press the function key for
Ring alone is activated/deactivated.
Intrusion
function key.
1. Enter the call number of the user you want.
2. Once the busy tone sounds, press key 4.
Silent intrusion is activated.
Ring
alone.
function and is used mainly in call centres.
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mivoice 5361 ipMivoice 5370Mivoice 5370 ip

Table of Contents