Dialling With A Configurable Key - Mitel MiVoice 5361 User Manual

Dialling with redial
You want to call a person you have already called.
In the last-number redial list your phone automatically stores the phone numbers of the
persons you have already called, complete with their names, where available. You can
now call the person in question using this last-number redial list.
The last-number redial list has a maximum of 4 entries.

Dialling with a configurable key

You want to call someone whose phone number is stored under a configurable key.
You can dial the person by pressing the corresponding key.
To find out how to configure a configurable key, refer to the chapter "Configuring keys",
page 83.
<1x short>
< 2x short>
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
Scroll through the list until the user you want is displayed.
Pick up the handset.
The phone number displayed is dialled.
➔
Press the Redial key.
Redial list is displayed.
➔
Press the Redial key several times or press the down navigation key to
scroll through all the phone numbers you last dialled.
Pick up the handset.
The phone number displayed is dialled.
➔
Note:
Redial list can also be selected using the menu:
Redial.
Activate the key's first allocated phone number:
Press the key once.
The key's first allocated phone number is displayed.
➔
Activate the key's second allocated phone number:
Press the key twice in quick succession.
The key's second allocated phone number is displayed.
➔
Pick up the handset.
The phone number is dialled.
➔
Supplementary features
>
Menu Call lists
>
33