Setting Up And Mounting The Phone - Mitel MiVoice 5361 User Manual

Setting up and mounting the phone

With the aid of the supplied stand rest you can set up the phone as a desk phone or
mount it to the wall.
Setting the phone up as a desk phone
You can set up the phone either at a 40° or a 25° angle. To do so, insert the stand rest in
different positions into the back of the phone until it snaps into place.
• Insert the stand rest as indicated on the installation diagram until it snaps into place.
• Connecting the handset: Plug the connector on the shorter straight extremity of the
handset cord into the socket on the handset. Plug the connector at the loose extremity
of the cord into the handset socket on the underside of the phone. To relieve the strain
on the cable feed the cable through one of the cable guides on the stand rest.
• Connect the phone as indicated in chapter "Connect MiVoice 5361", page 95 and
"Connect MiVoice 5361 IP", page 96.
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
25°
40°
Installation and first-time operation
2
1
2
1
93