Forwarding To A Message - Mitel MiVoice 5361 User Manual

Voice mail

Forwarding to a message

You cannot be reached on your phone. You want any internal user who calls you to get a
text message. The user hears the busy tone and obtains a text message on his display.
Requirement: The internal user must have a phone capable of receiving text messages.
Users whose phone cannot receive text messages are put through to your phone or
rerouted to a destination predefined within the system.
You can use one of the text messages stored in the system directly, modify it or create a
new message.
Notes:
• One diversion applies to all connected phones, in one number user concept.
• Only one forwarding variant at a time is possible.
Menu
Forwarding
Call Forwarding
Text message
<Text message>
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
Scroll to
Voice mail
Forwarding is activated.
➔
Notes:
• You can specify whether your voice mail should answer directly
forwarding) or with a delay
already on the phone
• You can deactivate forwarding using
Reset.
• A new voice message is signalled with a text message on the display
and a lit indicator LED in the idle state.
Press Foxmenu > Foxkey Menu.
Scroll to
Forwarding
Scroll to
Call Forwarding
Scroll to
Text message
Select one of the text messages stored in the system and press the
Foxkey.
Select
Adapt or expand the text and confirm with the
Forwarding is activated.
➔
and confirm with the
(Forwarding on no
(Forwarding if busy
and press the
Select
and confirm with the
and confirm with the
Supplementary features
Foxkey.
Ok
reply) or only if you are
).
>
Menu Activated features
Foxkey.
Foxkey.
Ok
Foxkey.
Ok
Foxkey.
Ok
(Call
>
49