Mitel MiVoice 5361 User Manual page 67

Ignore
Direct response without a triggered alarm:
You can execute the direct response function without the patient having triggered an alarm first.
This function must be stored under a function key (see chapter "Configuring presence/presence
profile", page 83).
Note:
Direct response is a special variation of the intercom feature (see "Starting an announce-
37
ment", page ). The differences are as follows:
• Direct response can only be used with a specifically configured Mitel Alarm Server.
• Direct response can only be triggered using the Direct response Foxkey once an alarm
is received.
Hotline Alarm
[b]
The hotline alarm
all other fields where a Mitel Alarm Server is used.
A user needs help and picks up the handset or presses the loudspeaker key. Thereafter,
he is automatically routed to the hotline destination number preconfigured in the Mitel
Alarm Server, i.e. to the responsible nursing staff. The nursing staff answers the call and
is connected with the user seeking help.
Alarm cancellation delay: Your system administrator can set a delay (depending on the
Mitel system phone). During this delay the user can enter another call number in order not
to trigger a call on the hotline destination number. If the user does not dial another phone
number during this predefined time or puts the handset back down again, a connection
with the Hotline number is automatically set up.
If the hotline destination number (i.e. the nursing staff) is busy, the call is routed according
to the system configuration. Contact your system administrator for more information.
Hotline (for internal users):
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
Ignoring an alarm:
Press the Foxkey on the staff phone.
Ignore
➔ The alarm remains active and the alarm signal is deleted from the staff
phone.
Deleting the alarm:
You can delete the alarm directly from the alarm button next to the bed.
➔ The alarm ends and the alarm signal is deleted from the staff phone.
is mainly used by nursing staff in the health care sector as well as in
User needs help:
User picks up the handset of his phone or presses the loudspeaker key.
A connection with the hotline number is automatically set up after 30
➔
seconds or any predefined time without the user having to do anything
else.
Supplementary features
67