Mitel MiVoice 5361 User Manual page 58

Supplementary features
<Function code>
<Function code>
Paging an internal user using the general bell
You are unable to reach an internal user and thus want to page them.
When general bell is configured in the system, you can search for an internal user using
the general bell. The paged person can answer from any phone.
Menu
Call features
58
1. Enter function code #36 for a business call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the internal or external phone number with the exchange access
digit.
Pick up the handset.
The phone number displayed is dialled.
➔
Note:
When you hang up, dialling by name and your private phone book remain
available for a whole minute so you can make another call.
Or:
1. Enter function code #46 for a private call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the external call number directly, without the exchange access
digit.
5. Pick up the handset.
The phone is now enabled; the external user is called.
➔
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter "Changing the PIN", page 76 or use the function
code *47 (see User Guide Function Codes on the
you have forgotten your PIN, your system administrator can reset it to the
default setting.
Press Foxmenu > Foxkey Menu.
Scroll to
Call features
and press the
Select
Mitel DocFinder). If
Foxkey.
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015