Wall Mounting - Mitel MiVoice 5361 User Manual

Installation and first-time operation

Wall mounting

You can also mount the phone on the wall. To do so, screw the stand rest onto the wall as
a bracket and hook the phone onto the stand rest.
Note:
As there is only a limited amount of space between the sockets on the back of the phone
and the wall on which it is mounted, you need to use a ribbon cable with a short connector
for the cord. Ask your dealer for a list of suppliers for a suitable ribbon cable (only
MiVoice 5361 IP).
• Fit the screws for securing the stand rest and mount the stand rest (Figure A).
• Connect the handset and phone cord to the phone (Figure B). For the correct connec-
tion assignment refer to Chapter "Connect MiVoice 5361", page 95 and "Connect
MiVoice 5361 IP", page 96.
• Insert the phone into the stand rest horizontally (Figure C-1) and slide downwards (Fig-
ure C-2).
• Unscrew the cams for holding the handset (Figures D-1 to D-3).
• Insert the handset.
3.5 mm
1
94
151 mm
A
2
C
B
1
2
D
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
3