Rear Cover - HP 205 G1 Maintenance & Service Manual

Rear cover

Description
Rear cover
The computer has one main rear cover that allows access to internal components.
To remove the rear cover:
1. Prepare the computer for disassembly (see
2. On the bottom of the computer, turn the two captive screws (1) to the left until they click and release
the rear cover.
3. Lift up on the bottom of the rear cover to disengage it (2), and then lift the rear cover off the computer
(3).
To replace the rear cover, reverse the removal procedures.
20 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Spare part number
752332-001
19).