System Board; Wlan Module - HP 205 G1 Maintenance & Service Manual

System board

Description
System board for use in HP 205 G1 models:
● AMD E1-2500 APU for use in models with Windows 7 or without the Windows operating system
AMD E1-2500 APU for use in models with Windows 8.1 Standard
●
● AMD E1-2500 APU for use in models with Windows 8.1 Professional or Windows 10
System board for use in HP 205 G2 models:
● AMD E1-6010 APU for use in models with Windows 7 or without the Windows operating system
● AMD E1-6010 APU for use in models with Windows 8.1 Standard
● AMD E1-6010 APU for use in models with Windows 8.1 Professional or Windows 10
System board for use in HP 18 models:
● Intel Pentium J2900 processor for use in models with Windows 7 or without the Windows operating
system
● Intel Pentium J2900 processor for use in models with Windows 8.1 Standard
● Intel Pentium J2900 processor for use in models with Windows 8.1 Professional or Windows 10
Intel Celeron J1800 processor for use in models with Windows 7 or without the Windows operating
●
system
● Intel Celeron J1800 processor for use in models with Windows 8.1 Standard
● Intel Celeron J1800 processor for use in models with Windows 8.1 Professional or Windows 10
The system board is located on the right side of the computer (viewed from the rear). It is secured with eight
Torx screws.
To remove the system board:
1. Prepare the computer for disassembly (see
2. Remove the rear cover (see
3. Remove the system board cover (see
4. Remove the memory modules (see
5. Remove the WLAN module (see
6. Disconnect all cables from the system board, noting their location for reinstallation.
46 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Rear cover on page 20).
System board cover on page
Memory on page
WLAN module on page
39).
41).
43).
Spare part number
751275-001
751275-501
751275-601
806244-001
806244-501
806244-601
782107-001
782107-501
782107-601
782108-001
782108-501
782108-601
19).