Installing An Optional Rear Port Cover - HP 260 G2 DM Hardware Reference Manual

10. To insert the new battery, make sure the positive side of the battery is facing up and slide one edge of
the replacement battery under the metal clamp that was pulled back when removing the old battery.
Push the other edge down until the clamp on that side of the battery secures the battery in the holder.
11. Replace the hard drive. See
12. Replace the access panel.
13. If the computer was on a stand, replace the stand.
14. Reconnect the power cord and any external devices, and then turn on the computer.
15. Reset the date and time, your passwords, and any special system setups using Computer Setup.
16. Lock any security devices that were disengaged when the computer access panel was removed.

Installing an optional rear port cover

To install the optional rear port cover, connect the cables, and then insert the hooks on the port cover into the
slots on the rear of the computer and slide the port cover to the right.
18 Chapter 2 Hardware upgrades
Removing and replacing a hard drive on page 9 for details.