Rear port cover
1.
Prepare the computer for disassembly (see
2.
Remove the stand (see
3.
Remove the four Phillips screws securing the back cover (1), and then lift the back cover to remove it
from the computer (2).
To install the rear port cover, reverse the removal procedures.
Locating internal components under the rear port cover
Component
1
2
24
Chapter 4 Removal and Replacement Procedures
Stand on page
19).
Optical disc drive (optional)
Memory modules
Preparing to disassemble the computer on page
Component
3
4
19).
RTC battery
Hard drive