Removing And Installing The Rear Cover; Removing The Rear Cover; Installing The Rear Cover - HP ProOne 600 Hardware Reference Manual

Removing and installing the rear cover

Removing the rear cover

1. Place the computer facedown on a soft flat surface. HP recommends that you set down a blanket, towel,
or other soft cloth to protect the bezel and screen surface from scratches or other damage.
2. Remove the four screws securing the back cover (1), and then lift the back cover from any cavity to
remove it from the computer (2).

Installing the rear cover

Align the rear cover with the computer, press all tabs on the panel into place (1), and then secure it with the
four screws (2) used to remove it.
Removing and installing the rear cover 23