Operating the sorter
operator data entry
batch id entry
USE NUMERIC KEYPAD
TO ENTER ID
BATCH ID
SUB ID
GRAND ID
VIEW
ID
64
The Control allows entry of data pertaining to
the coins being processed. This may include ID
numbers, bagstop values, media, etc.
Note: The Sorter can be programmed to re-
quire the operator to enter a batch id number
(batch total cannot be accepted until batch id
number is entered). Refer to the Program-
ming Section later in this guide for complete
instructions.
1. From the HOME SCREEN, press the
DIRECT ACCESS ID Icon (
2. The Display will show the Batch, Sub and
Grand ID entry screen.
123456789--0123
2534--08
12--23--2001
GRAND
SUB
TOTALS
TOTALS
FIGURE #58
ID ENTRY SCREEN
3. Cycle the DOWN ARROW Icon Key (
highlight the Batch ID.
4. Enter the Batch ID (up to 15 digits) using the
Numeric Keypad.
5. Press ENTER Key to enter ID Number.
6. Press the HOME Icon Key (
to the HOME SCREEN.
) Key.
) to
) to return