Initializing Control For Internal Printer Operation - DeLaRue MACH 12 User Manual

Programming
initializing the control for internal printer operation
. ,
/
PROGRAMMING MODE
NEXT
PAGE
110
The Sorter must be "told" that the Printer is
installed, so that the proper communication link
can be established.
Note: If a batch, sub or grand total is ac-
cepted and the printer has not been initial-
ized, the printer tape may not advance far
enough for proper tear--off.
Note: The Sorter must be in programming
mode. To enter the programming mode, per-
form the following steps:
A. Turn Sorter Keyswitch to the unlock posi-
tion.
B. Hold UPPER ICON SELECT Key down
while turning Sorter ON.
C. The Display will show:
$.00
1234
FIGURE #96
HOME PROGRAMMING SCREEN
D. Press the NEXT PAGE Icon Key.
RS232