Default Settings - DeLaRue MACH 12 User Manual

. ,
/
PROGRAMMING MODE
NEXT
PAGE
HOME PROGRAMMING SCREEN

default settings

The Sorter is set when manufactured to the fol-
lowing default parameters. Each of the parame-
ters may be changed to fit your specific applica-
tion.
To enter the Programming Mode: 1) Turn Key-
switch to the unlock position. 2) Hold the UP-
PER ICON SELECT Key down at power--up.
$.00
1234
RS232
FIGURE #93
Press the NEXT PAGE Icon Key to cycle
through the programming mode, following the
instructions on the Display to change the default
settings. Once completed, turn the Keyswitch to
the lock position.
DEFAULT SETTINGS
1. SUPERVISOR CONTROL KEYS
All keys are active.
2. DISPLAY DECIMAL POINT / COMMA
(CHOICE AND LOCATION)
Decimal point in position .00
3. BATCH PRINT LENGTH / NUMBER OF
COPIES
Long printout with 1 copy
4. SUB PRINT LENGTH / NUMBER OF CO-
PIES
Long printout with 1 copy
Programming
107