DeLaRue MACH 12 User Manual page 139

Note: To enable the Conversion Factor Feature,
"PRINT UNIT COUNT" (FIGURE #111) must be
enabled.
Note: If Euro Conversion Factor is "1", the total
euro lines on the printer tape are not printed
(see FIGURE #120 thru FIGURE #122.
. , /
PROGRAMMING MODE
NEXT
PAGE
HOME PROGRAMMING SCREEN
programming key functions
4. CONVERSION FACTOR
A. Turn Keyswitch to the unlock position.
Introduction: Internationally , this feature
allows the coinage from those countries par-
ticipating in the Euro coin conversion pro-
gram a method of calculating the value of
existing coins compared to the new Euro
coins.
Domestically, this feature allows the coin
processing entity (bank, savings / loan, etc.)
to charge a percentage of the total amount
processed as a processing / handling fee.
B. Hold UPPER ICON SELECT Key on
Control down, and switch the Sorter
Power Switch to ON.
C. The Display will show:
$.00
1234
FIGURE #117
D. Press the PRINTOUT Icon Key (
Programming
RS232
).
129