Table of Contents
Advertisement
Programming
default settings
108
5. GRAND PRINT LENGTH / NUMBER OF
COPIES
Long printout with 1 copy
6. RS232 COMMUNICATION PORT
PARAMETERS
Port #1
9600 Baud
No Parity
7 Data Bits
Printer Format
No Handshaking
No ACK NAK
Port #2
Same as Port #1
Port #3
Same as Port #1
Port #4
Same as Port #1
7. PRINT ORDER (VALUE / SIZE)
Value
8. BAGSTOPS (Enable / Disable)
Enable
9. RUN / AUTO--STOP
Stop after 7 seconds
10. BAGSTOP DISPLAY (units or dollars)
Dollars
11 CLEAR GRAND / GRAND AND PARTIAL
TOTALS
Grand Clear will only clear Grand Totals.
12. BAGSTOP VALUES
As shown in FIGURE #94
13 COIN VALUES
As shown in FIGURE #94
Note: Counting stations will be programmed
to specific values / quantities at production if
specified. If none are specified the values /
quantities will be programmed as shown in
the following chart:
Hide quick links:
Advertisement
Table of Contents
