Changing The Number Of Bagstops - DeLaRue MACH 12 User Manual

Operating the sorter

changing the number of bagstops

COIN BAGSTOP
.10
.01
.05
.25 1000.00
1.00 1000.00
.50 1000.00
USE KEYPAD TO
ENTER BAGSTOP / #
62
Note: The number of bagstops at a particu-
lar bagstop setting can be set as shown be-
low. Whenever the number of stops equals
the number of stops requested, the bagstop
screen will be shown after the bagstop has
been cleared. At this time enter a new bag-
stop setting and / or number of stops, then
press home to resume normal operation.
1. From the HOME SCREEN, press the direct
access BAGSTOP Icon Key (
2. The Display will show the bagstop setting
screen.
# OF STOPS
500.00 25
50.00 10
200.00 25
10
50
30
FIGURE #57
BAGSTOP SETTING SCREEN
3. Cycle the # of stops (right) DOWN ARROW
Icon Key to highlight the desired stop num-
ber.
4. Enter the number of stops using the Numeric
Keypad followed by the "Enter" Key.
5. Press the HOME Icon Key (
to the HOME SCREEN.
6. Press the MOTOR ON / OFF Key to start
the Sorting Motor.
).
) to return