Installation; Unpack; Installation Unpack - DeLaRue MACH 12 User Manual

Shipping
Carton
Inner
Liner
Accessories
Package
Pallet
FIGURE #2
PACKAGING
SUPPORT HERE
SUPPORT
BLOCK
PALLET
FRONT CASTER
FIGURE #3
UNPACKING
The internal packaging is designed not only for
protection during shipment but to allow an easy
means of removal from the shipping container.
THE SORTER WEIGHS
MATELY 200 POUNDS. FOLLOW THE
UNPACKING INSTRUCTIONS
AVOID DAMAGE TO THE SORTER OR
PERSONAL INJURY.
Top
Pad
1. Referring to FIGURE #2, remove the Inner
Liner and Top Pad. The Accessories
Package (located in the Coin Hopper) may
be removed at this time, if desired.
2. Referring to FIGURE #3, carefully roll the
Sorter forward until the Front Casters are
resting on the floor in front of the Pallet.
3. Raise the rear of the Sorter up slightly to
clear the Support Block, and continue to roll
the Sorter carefully forward to clear the Pal-
let. Lower the Sorter to the floor.
CHECK FOR SHIPPING
DAMAGE
The Sorter and all options were
SUPPORT
thoroughly tested after they were
HERE
manufactured and carefully pack-
aged when they left the factory.
ANY DAMAGE THAT MAY HAVE
BEEN DONE IN SHIPMENT
SHOULD BE REPORTED TO
THE CARRIER IMMEDIATELY,
AND THE SHIPPING CAR-
TON(S) AND PACKAGING RE-
TAINED FOR INSPECTION, IF
NECESSARY.
ROLL
FORWARD CHECK FOR MISSING PARTS
Compare the items received
against the original order. Notify
your Sales / Service Representa-
tive of any discrepancies.

Installation

unpack

APPROXI-
TO
5