Table of Contents
Advertisement
FIGURE #6
POWER SWITCH
Access Panel
Interlock Switch
Access
Panel
Top Housing Interlock Switch
FIGURE #7
INTERLOCK SWITCHES
power / interlock switches
Be sure the Power Switch (See FIGURE #6) is
in the OFF position. Connect the Sorter end of
the Power Cord as shown in FIGURE #5, and
the opposite end to a grounded AC outlet of the
appropriate voltage.
Switch the power on to begin programming or
operation.
Power
Switch
There are two Interlock Switches, located inside
the Sorter, that will stop the Sorting Motor when
the Access Panel is pulled forward or the Top
Housing is raised.
THESE INTERLOCK SWITCHES ARE FOR
YOUR PROTECTION AND SHOULD NOT
BE REMOVED OR CIRCUMVENTED IN
ANY WAY.
DO NOT PLACE HANDS IN FUN-
NEL AREA WHEN SORTER IS
OPERATING AND ACCESS
PANEL IS FORWARD.
NEVER ALLOW LONG HAIR OR
LOOSE CLOTHING, (TIES, ETC.)
NEAR FUNNEL AREA WHEN
SORTER IS OPERATING.
Installation
7
Hide quick links:
Advertisement
Table of Contents
