PORT X COMM ERROR
--CHECK PORT X RS232 PARAMETERS
--INSURE CABLE IS PROPERLY CONNECTED
--INSURE PERIPHERAL DEVICE IS
OPERATING PROPERLY
COMMUNICATIONS ERROR
Operator display messages
communications error
An error has occurred at the port shown on
the Display. Check all physical connections
between Sorter and Peripherals. If all con-
nections are proper, check the port parame-
ters and resume operation. If the problem
persists, contact your Authorized Service
Representative for assistance.
FIGURE #90
Note: Port "x" in the above figure represents
the port that has the error.
101