DeLaRue MACH 12 User Manual page 151

ENTER COIN VALUE:
SELECT COIN TYPE:
COIN
SELECT DECIMAL POINT LOCATION:
0
DUAL BAG:
COIN DEBOUNCE:
COIN PROGRAMMING SCREEN
SELECTION OF THE COIN DEBOUNCE SET-
TING SHOULD ONLY BE PERFORMED BY
YOUR AUTHORIZED SERVICE TECHNICIAN.
IT IS NOT AN OPERATOR--SETABLE OR
CHANGEABLE FEATURE.
programming key functions
E. The Display will show:
TOKEN TOK / VAL
0. .0 .00
ENABLE DISABLE
1
FIGURE #131
F. Cycle the UPPER ICON CHOICE Key to
select the coin station to be programmed.
G. Cycle the DOWN ARROW Icon Key
( ) to select the coin parameter to be
changed.
H. Cycle the RIGHT ARROW Icon Key
( ) to highlight the option you wish to
select for the chosen coin station.
I. To enter the coin value or coin label for
printouts, use the Numeric Keypad to en-
ter the value or coin label, and press the
ENTER Key.
J. To select what type of coin is to be
sorted, choose the second selection as
follows:
COIN -- Has denominational value and adds
to Batch, Sub and Grand Totals.
TOKEN -- Coin label will be of the #XXXXX
type, there will only be a unit value and it will
not add to the Batch, Sub or Grand totals.
Programming
.50
DISABLE
.000
2 3 4
141