Initializing Control For External Printer Operation - DeLaRue MACH 12 User Manual

Programming
initializing the control for external printer operation
. ,
/
PROGRAMMING MODE
NEXT
PAGE
114
The Sorter must be "told" that a Printer is con-
nected, so that the proper communication link
can be established.
Note: The Sorter must be in programming
mode. To enter the programming mode, per-
form the steps below.
A. Connect the Printer to port #4 at the rear
of the Sorter.
B. Turn Sorter Keyswitch to the unlock posi-
tion.
C. Hold UPPER ICON SELECT Key down
while turning Sorter ON.
D. The Display will show:
$.00
1234
FIGURE #101
HOME PROGRAMMING SCREEN
E. Press the NEXT PAGE Icon Key.
RS232