Table of Contents
Advertisement
Changing the light bulb
Before changing light bulb, unplug machine from
socket outlet.
Use original SINGER light bulbs only (
code 358207 6W .
)
Removing light bulb (illustration 2)
1. Remove screw (A) located on face plate and remove
plate pulling it down and to the right.
2. Do not attempt to unscrew the light bulb. Push bulb up
into the socket and at the same time, turn it to the
direction indicated (clockwise) to unlock bulb pin
(illustration 2).
3. Pull bulb down and out of machine.
Replacing light bulb (illustration 3)
1. Push new bulb into socket, just as for the side pin
slides the slot of the socket. Push it up and turn to the
indicated direction (counterclockwise) to lock into
position.
2. Replace face plate again and tighten screw.
102
1
A
2
3
Table of contents
11
Accessories
14
16
18
18
20
20
22
22
22
24
Preparing the machine to sew
Winding a bobbin
26
28
30
34
Starting a seam
Adjusting thread tension
36
38
40
Straight stitch, zig-zag and other stitches
42
42
44
46
48
48
Balancing flexible stitches
48
Pattern stitching module
50
50
Decorative and Flexible stitch patterns
52
Patterns for Quilting
72
Blind hem stitching
74
Buttonholes and buttons
Four-step buttonhole
76
Balancing the buttonhole
80
Functions of the machine
82
Applications with straight stitching
84
Free-arm sewing
86
Aplications: Sleeves and buttons
86
How to use the Darning and Embroidery foot
88
Applications with the Darning and Embroidery foot
88
How to use the Even foot
90
Applications with the Even foot
92
Quilter table applications
94
Monogram and embroidering
96
Maintenance
Removing and replacing bobbin case
98
Cleaning the machine
100
Changing the light bulb
102
Lubricating the machine
104
Performance checklist
106
Hide quick links:
Advertisement
Table of Contents
